Elster AMCO Industrial Cold Water Meters, Hot Water Meters
Elster AMCO Water is focused on providing integrated solutions for utility measurement needs. Their approach allows you to implement flexible, cost efficient metering and reading systems that can be integrated into today’s operations, yet allow your system to evolve as technology advances.
All utility products available from Elster AMCO Water meet or exceed the applicable AWWA standard plus the product-appropriate industry certifications.
The C700 is an oscillating piston style, positive displacement water meter. The product utilizes a piston that water use rotates in a measuring chamber, each piston revolution being equivalent to a known volume of
water. The piston movement is transferred by a magnetic drive to a straight reading sealed register which contains the appropriate reduction
gearing.
• C700 5/8" Download (.pdf)
• C700 3/4" Download (.pdf)
• C700 1" Download (.pdf)
• C700 1 1/2" and 2" Download (.pdf)
• C700 polymer Download (.pdf)
• Digital register for C700 Download (.pdf)
• V100 Download (.pdf)
• Industrial Pulsers for C700 Download (.pdf)
Elster AMCO Water turbine meters and compound meters provide long-life, high accuracy measurement for high volume services.
T4000/TS4000 turbine meters are engineered for performance:
- The turbine's throated inlet increases low flow sensitivity, assuring maximum revenue with low pressure loss
- The debris damage typical of high volume installations is minimized by a design that incorporates space to allow passage of many suspended solids.
- Selection of high quality materials extends service life.
• T4000 1 1/2" to 12" Download (.pdf)
• TS4000 1 1/2" to 6" Download (.pdf)
• Digital register for T4000 Download (.pdf)
For monitoring hot water flows for batch or continuous flow processes, Elster AMCO Water provides five models of inferential meters to accommodate a variety of flow rates, pipe sizes and maximum temperatures.
At the lowest flow rates (¼ to 22 gpm) and pipe diameter (¾”) is the model S130 inferential meter, of the single jet design. Model M150, a multi-jet design meter, is available in sizes 1 and 1 ½” NPT inlet and outlet, for flows from 1/3 to 31 gpm and 7/8 to 88 gpm, respectively. Both the S130 and S150 are brass case meters suitable for measuring water up to 195º F and services up to 150 psi, and both can be equipped to provide dry contact reed switch output of 1 contact per gallon (or per 10 liters).
• S130 Download (.pdf)
• M190 Download (.pdf)
• H4400 Download (.pdf)
The industrial product line includes electronic devices for typical applications including remote totalization, batch control, rate of flow indication, and transmission of flowrate information via 4-20mA signal suitable as a standard input into most SCADA, PLC or other process monitoring or control systems. Contact your local inudustrial business partner for information on selecting the appropriate meter output to work best with these electronics in your particular application.
Wiring diagrams are available from our technical support section upon request.
• T210 Scancounter - wall mount remote totalizer Download (pdf)
• CTR27 Battery powered, panel mount, resettable totalizer Download (pdf)
• CTR22 Prescaling counter Download (pdf)
• EBC2C Electronic Batch Controller Download (pdf)
• R420 Totalizer, Rate indicator, Transmitter Download (pdf)
• ERm Electronic Register Download (pdf)